• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 53 subscribers
  • Views 159 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC2340R5: function or API to Disconnect device connected on cc2340r5 ble

Rohit datwani
Prodigy 30 points
Part Number: CC2340R5

Hello Everyone , Can anyone tell me the function to disconnect the device connected on ble .I used the function

 bStatus_t BLEAppUtil_disconnect(uint16 connHandle)
{
return GAP_TerminateLinkReq(connHandle, HCI_DISCONNECT_REMOTE_USER_TERM);
}

 but it is aborbting my code.

  • +1
    TI__Guru**** 207157 points

    Hi Rohit,

    Thank you for evaluating the CC2340R5 and posting your question to the E2E Forum!  All of TI's BLE E2E Forum experts are taking a well-deserved time off on Friday, May 17th to Monday, May 20th and will be returning to answer forum posts on Tuesday, May 21st in the order and priority in which they were received.  Until then, here are some resources you can further consider which may resolve your issue independently:

    If you find the solution to your problem then please respond to this E2E post!  Otherwise, here is some additional information you can provide to best support the BLE E2E experts when they return to office:

    Thank you for your patience and diligence during this time!

    Regards,
    Ryan