Want to replace CC2564 Chip with CC2564MODN

veena r

Other Parts Discussed in Thread: CC2564

Hi ,

We are using CC2564 chip + MSP430 in the present design , We are planing to replace CC2564 chip with CC2564 Module. we are SPP profile program for our application.

Please let us know what and changes we need to make in the following fields ,

1)Bill of materials components

2) Software changes is required?

3) FCC and CE certification and standard tests.

Thanks,

Veena.R

over 11 years ago

0 Sundeep Javvaji over 11 years ago

TI__Mastermind 32615 points

Hi,

1. let me check it internally and get back to you on this.

2. No software changes required if you were using CC2564B device earlier. If you were using CC2564 device then you need to add the below paths http://processors.wiki.ti.com/index.php/CC256x_MSP430_Bluetopia_Basic_Demo_APPS#CC256XB_Information

3. MODN is already FCC and IC certified please see http://processors.wiki.ti.com/index.php/CC256x_FCC_Certification_Guide

0 veena r over 11 years ago in reply to Sundeep Javvaji

Prodigy 30 points

Thanks for your Reply Sundeep.

Please provide the detials the impact Bill of material as well.
MODN is already FCC and IC certified please see :----- Does it mean , If we are using MODN in our product then we dont have to go for FCC CE an IC certifications again?
Can we get a comparison chart for CC2564 chip an MODN?

Reards,

Veena.R

0 Sundeep Javvaji over 11 years ago in reply to veena r

TI__Mastermind 32615 points

Hi,

2. If you are using the MODN as provided by TI the FCC/IC ID certification can be reused.
3. I think you want to know what is different between CC2564 and CC2564B(MODN uses CC2564B). You can get this from the datasheet

Bluetooth®︎

Bluetooth forum

Want to replace CC2564 Chip with CC2564MODN