CCS/BOOSTXL-CC2650MA: ADS1194 Bluetooth Matlab

David Bigan

Prodigy 140 points

Part Number: BOOSTXL-CC2650MA
Other Parts Discussed in Thread: ADS1194, CC2650MODA, CC2650, LAUNCHXL-CC2650

Tool/software: Code Composer Studio

Hello,

I am a student working for a project using the BOOSTXL-CC2650MA.

I would like to program the CC2650MA as a single chip directly in it.

I downloaded the Ble SDK but I don't know which example I should take.

Should I start my code from CC2650bp or CC2650lp then change the pin mapping in the code ?

And what does cc2650em, rc and stk ?

Thank you,

My goal is to create a code with CC2650MA as MCU which communicates with ADS1194 by SPI and sends data in MatLab/Application.

If you have any advices or documents for that thank you in advance.

Best Regards,

David Bigan, Student in ESIEE Paris

over 3 years ago

0 YiKai Chen over 3 years ago

Guru 735455 points

cc2650em, rc and stk are different TI CC2650 EVB. For CC2650MODA, it’s OK to use CC2650LP as starting base.

0 Ryan Brown1 over 3 years ago

TI__Guru**** 202296 points

Hello David,

Since you plan on using the BOOSTXL-CC2650MA as a standalone processor you would start with a LAUNCHXL-CC2650 example then make the board file changes as instructed from the SWRA534 Application Report.

Regards,
Ryan

0 David Bigan over 3 years ago in reply to Ryan Brown1

Prodigy 140 points

Hi,

is there a project zero for launhXL ? or only just the code for sdk ble ?

Thank you;

Regards,

David Bigan

0 David Bigan over 3 years ago in reply to YiKai Chen

Prodigy 140 points

Thank you,

I'm starting to better understand.

Regards,

David Bigan

0 YiKai Chen over 3 years ago in reply to David Bigan

Guru 735455 points

ProjectZero for LAUNCHXL-CC2650 can be downloaded at

0 David Bigan over 3 years ago in reply to YiKai Chen

Prodigy 140 points

Thank you,

I will see that.

Regards,

David Bigan

Bluetooth®︎

Bluetooth forum

CCS/BOOSTXL-CC2650MA: ADS1194 Bluetooth Matlab