• State TI Thinks Resolved
  • Locked Locked
  • Replies 3 replies
  • Answers 1 answer
  • Subscribers 16 subscribers
  • Views 292 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TRF7970A: An “ISO15693 ROM Sensor Support Disabled” Error has occurred when RF430FRL15XH GUI Interface tring to request temprature of RF430FRL152H Patch in 'Demo Mode'

zexi su
Prodigy 10 points
Part Number: TRF7970A
Other Parts Discussed in Thread: RF430FRL152H,

Hello,

  As the title suggests, when I try to use the RF430FRL15XH GUI Interface Version 1.3.1.0 to read the ADC2 pin in my RF430FRL152H Patch, which is connected to a 100k thermistor, the GUI reports an error "ISO15693 ROM Sensor Support Disabled" as below. The GUI works in Demo Mode mode and the issue is not resolved after I click "Yes" either. I'd like to ask if I need to do any other specific setup. What perhaps caused this to happen? Or is there a guide that you can provide for me? Please help me, thank you very much!

  

Best regards,

szx

  • 0 in reply to zexi su
    Prodigy 10 points

    Btw, I just use a TRF7970A EVM for NFC transponder. And I haven't  bootloader it yet. The patch isn't equipped with any connector and is powered by coil located in TRF7970A EVM.  

  • 0
    TI__Mastermind 19290 points

    Hello Customer, thank you for your question and interest in our products.

    The forum support of this product has been reduced to first reference our existing documentation and collateral. For support, please take a look to the “Similar Topics” section at the lower right of the thread page. In addition, please consult the existing collateral in the “Technical Documentation” section of the RF430FRL152H product web page along with the Frequently Asked Question document. Alternatively, you can use the search engine of your choice to look for related E2E threads. With each of these resources we believe it will help with your question.