Metal Cover for radio CC1101 circuit

luis.lopez

Other Parts Discussed in Thread: CC1101

Hi all!

I am designing a circuit based on CC1101 and I am looking for a metal cover for it. Knows anyone where could I find this type of "hardware"? It's seem like the attached pic.

Thanks a lot for pay attention.

Luis

Luis.

over 11 years ago

0 TA12012 over 11 years ago

TI__Mastermind 36385 points

Luis,

Most of the shields you will find in designs will be customer shields, where the shield manufactures will custom make you a shield to fit your application. There is a pretty substantial "Engineering charge" for this type of work. So if, you can live with a standard of the shelf design I recommend starting by looking at the inventory of your favorite distributor.

Here is a page of the shields from Digikey.

http://www.digikey.com/product-search/en/rf-if-and-rfid/rf-shields/3539677?k=shield

Regards,
/TA

0 luis.lopez over 11 years ago in reply to TA12012

Expert 1050 points

Thanks a lot Thomas. The response has been very helpful.

BR.

Luis

Other wireless

Other wireless technologies forum

Metal Cover for radio CC1101 circuit