• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 54 subscribers
  • Views 225 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LAUNCHXL-CC1312R1: CC1312R Pin Assignments

David Jones
Intellectual 820 points
Part Number: LAUNCHXL-CC1312R1
Other Parts Discussed in Thread: CC1312R, SYSCONFIG

Hi

I am laying out a new PCB using the CC1312R, can someone please assist me with pin number assignments.

I will be using the modules below.

2 x I2C

2 x SPI

1 x I2S

1 x Uart

2 ADC I/O's

Any assistance would be greatly appreciated.

Regards

David

  • 0
    TI__Expert 4425 points

    Hi David,

    You can map the digital signals of the peripherals to any DIO you want. The pin mapping can be configured using SysConfig (under the PinMux section of the specific sysconfig) See UART2 example below:

     

    Similarly you can also configure the analog signals mapping for the ADC in SysConfig.

    Regards,
    Nikolaj