Other Parts Discussed in Thread: SYSCONFIG
Hi ti team,
morningsidemodule uses TI chip CC1312R7, now encounter Jlink+openocd hardware GPIO test problem, how to set GPIO input and output? How to set UART and RTC? Please help support.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
I'm not familiar with this module.
For CC1312R7 in general I would recommend using SysConfig to configure GPIO, UART and RTC. You can also take a look at the following example projects:
- GPIO standby: https://dev.ti.com/tirex/explore/node?node=A__AN-aspa4EhUpM6NIxCDRgQ__com.ti.SIMPLELINK_CC13XX_CC26XX_SDK__BSEc4rl__LATEST
Cheers,
Marie H