CC1312R: CC1312 -Technical issues

switch

Part Number: CC1312R
Other Parts Discussed in Thread: SYSCONFIG

Hi ti team，

morningsidemodule uses TI chip CC1312R7, now encounter Jlink+openocd hardware GPIO test problem, how to set GPIO input and output? How to set UART and RTC? Please help support.

over 1 year ago

0 Marie H over 1 year ago

TI__Guru 74941 points

Hi,

I'm not familiar with this module.

For CC1312R7 in general I would recommend using SysConfig to configure GPIO, UART and RTC. You can also take a look at the following example projects:

- GPIO standby: https://dev.ti.com/tirex/explore/node?node=A__AN-aspa4EhUpM6NIxCDRgQ__com.ti.SIMPLELINK_CC13XX_CC26XX_SDK__BSEc4rl__LATEST

- UART Echo: https://dev.ti.com/tirex/explore/node?node=A__ABaHYpdB2F9rUvj3KVJEnA__com.ti.SIMPLELINK_CC13XX_CC26XX_SDK__BSEc4rl__LATEST

- Timer LED: https://dev.ti.com/tirex/explore/node?node=A__AF2HiOyemS1.piLu.fN3ug__com.ti.SIMPLELINK_CC13XX_CC26XX_SDK__BSEc4rl__LATEST

Cheers,

Marie H

Sub-1 GHz

Sub-1 GHz forum

CC1312R: CC1312 -Technical issues