CC1310: Sub-1 GHz forum

akash soni

Part Number: CC1310
Other Parts Discussed in Thread: MSP430FR6047, WMBUS, SIMPLELINK-CC13X0-SDK,

Hello

I want to implement wireless m bus stack for my water meter . But when I am trying to debug library file i am getting errors

and can you help me to connect MSP430FR6047 EVM with cc1310 launchpad

Thank you

akash

5 months ago

0 Siri 5 months ago

TI__Guru* 80891 points

Please specify what SW you are running, which CCS version etc.

I used CCS 9.1 and could easily build the wmbus projects from the wmbus_cc13x0_rtos_2_0_0 (using simplelink_cc13x0_sdk_2_20_00_38):

I cannot answer how you can connect the MSP430FR6047 EVM (not familiar with it) to the CC1310 LP when you do not tell me how you want the two devices to communicate?

Over UART, SPI, I2C ????

Siri

0 akash soni 5 months ago in reply to Siri

Prodigy 60 points

i used ccs 12.6 and it is not working in my PC I think it is an error of something gmake

0 akash soni 5 months ago in reply to akash soni

Prodigy 60 points

can you show me your ccs settings

+1 Siri 5 months ago in reply to akash soni

TI__Guru* 80891 points

From the release note of the stack:

"This wM-Bus STACK revision 2.0.0 requires:

- CCS v8.1.0.00011 IDE from processors.wiki.ti.com/.../Download_CCS

- SIMPLELINK-CC13X0-SDK v2.20.00.38 from www.ti.com/.../SIMPLELINK-CC13X0-SDK

- CC13x0 LaunchPad: www.ti.com/.../launchxl-cc1350

http://www.ti.com/tool/launchxl-cc1310"

I actually got it to work with the 9.1, but I do not think 12.6 will work.

Please download an older version of CCS.

Siri