• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Subscribers 54 subscribers
  • Views 322 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LP-CC1352P7: How to white-label Wi-SUN Network Portal?

Tim Cruise
Intellectual 927 points
Part Number: LP-CC1352P7

Dear TI Engineers,

Finally, I have completed my test Wi-SUN Network on a Raspberry Pi 4.  I can also run the built-in Wi-SUN monitor web portal.

Now, my question is:

  • How do we customise the portal network name as shown in my attached screenshot?  If we are going to commercialise it, we need our own network name.

  • +1
    TI__Mastermind 20407 points

    Hi  Tim,

    ti-wisun-webapp\client\src\components\DashTitle.tsx

    This is the file that has the title Your Wi-SUN Network.

    Regards,
    Sid

  • 0 in reply to Sid
    Intellectual 927 points

    Hello Sid,

    Yes, it works.  Thanks.

    My 2nd question is:

    • When a 3rd party or TI wi-sun node or border router joins another existing Wi-SUN mesh, which network ID must it present?  panid, networkname or both?

    Yours faithfully,
    Timmy

  • +1 in reply to Tim Cruise
    TI__Mastermind 20407 points

    Hi Tim,

    Typically when a router node wants to join a particular border router, you need the same network name. The PAN ID is received by the router node when it selects a border router.
    Regards,

    Sid