• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 40 subscribers
  • Views 119 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

LAUNCHCC3235MOD: Using Mikroe PROFET15 with boosterpack pins configuration

LAUNCHCC3235MOD: SimpleLink reconnects after about 16 minutes, causes and avoiding

Malcolm Windham
Expert 1580 points
Part Number: LAUNCHCC3235MOD

Assuming the problem could be SimpleLink configuration, what values might after loss and reacquiring after approximately. 16 minutes of inactivity? I am testing some data logging tat works atwo and five minute response messge times, but when I went for for about 39 minutes , it loses  connection about 16 minutes in. What is SL_STOP_TIMEOUT? Would a fixed address help? Connection is dhcp client.

  • 0
    Expert 1580 points
    • This may be my fault as I had a buffer overrun that would take a while to cause trouble and later, when trying to verify the data being stored, I used an unaccepted printf/snprintf format specifier in Display_printf.The connection seems fairly reliable now and recovers if dropped.
  • +1 in reply to Malcolm Windham
    TI__Genius 9565 points

    Hi Malcom,

    Thanks for reaching out and Im glad it seems you found the cause of the issue. If you have any other questions feel free to ask, if not I will close the thread.

    Kind Regards,

    Rogelio