The TI E2E™ design support forums will undergo maintenance from Sept. 28 to Oct. 2. If you need design support during this time, contact your TI representative or open a new support request with our customer support center.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CC2533: V,IH = 2.5V for logic input?

Part Number: CC2533

Team-

The logic input 1 on the CC2533 appears to be 2.5V from the data sheet.  This seems quite high for a 3.3V IC.  Is this correct?  We would expect something closer to 2V?

  • Hello Antenna_Head,

    This is the DC characteristic evaluated at VDD = 3 V and is the same parameter value reflected in the datasheet of any CC253X device.  The hysteresis is within ±0.5 V of the target voltage for these devices.

    Regards,
    Ryan