CC2652R7: Migrating my project from CC430F5137IRGZ

Clement Wong

Part Number: CC2652R7

Hi,

I have a product that's using CC430F5137IRGZ already, and now want to move to using Thread. It is basically reading ADC and sending it out. I do understand that I need to rewrite firmware, do I need to do any changes to the PCB board?

Thanks,

Clement

4 months ago

0 YiKai Chen 4 months ago

Guru 735465 points

If you change from CC430 to CC2652R7, you should need to change PCB board design. You can refer to LP-CC2652R7 Evaluation board for schematics and layout of your own custom board.

0 Ryan Brown1 4 months ago

TI__Guru**** 205097 points

Hi Clement,

There is no specific Migration Guide for these parts. For Software guidance, you can choose between the ot-ti github or SimpleLink F2 SDK. You can also refer to the CC2652R7 LaunchPad Design Files and SWRA640 for Hardware recommendations.

Regards,
Ryan

Zigbee & Thread

Zigbee & Thread forum

CC2652R7: Migrating my project from CC430F5137IRGZ