Frequent Questions

  • [FAQ] TDA4VM: Large size of tispl.bin after integrating custom DM firmware for MCU R5

    Part Number: TDA4VM Other Parts Discussed in Thread: TI-CGT I have updated the Linux SDK top level Makefile to add my custom firmware for MCU1_0 (MCU R5). As I understand the path to the ELF image needs to be set as UBOOT_DM in the Makefile. But after…

  • [FAQ] TDA4VM: Not able to receive messages for a particular CAN ID, how to debug?

    Part Number: TDA4VM I am using MCAL CAN driver and able to transmit any message from the TDA4 using MCU MCAN0. However when I try to receive messages for a particular CAN ID from an external CAN emulator, I am not getting that on the TDA4's MCU MCAN0…

  • [FAQ] BQ24800: [FAQ] How do I ensure the charger schematic is satisfactory? Is there a schematic checklist for bq24800?

    Part Number: BQ24800 Dear all, The following document shows key considerations when choosing external components for BQ24800. If there are any discrepancies, the datasheet should be referred. Regards, Pengzhao Zhu Application Engineer Texas Ins…

  • [FAQ] How to troubleshoot common Stepper Stall Detect Issues

    Other Parts Discussed in Thread: DRV8889-Q1 , DRV8434S , DRV8434A Stepper motor drivers such as the DRV8434S, DRV8434A, and DRV8889-Q1 include a stall detection feature to detect an overload or stall condition while the motor is stepping. When the motor…

  • [FAQ] BQ24780S: [FAQ] How do I ensure the charger schematic is satisfactory? Is there a schematic checklist for bq24780S?

    Other Parts Discussed in Thread: BQ24780S Dear all, The following document shows key considerations when choosing external components for BQ24780S. If there are any discrepancies, the datasheet should be referred. Regards, Pengzhao Zhu Application…

  • [FAQ] Compiler: New C28/CLA compiler version 21.12.0.STS is available

    TI is pleased to announce a new C28/CLA compiler version 21.12.0.STS which includes the following new features: Available in release 21.12.0.STS: Interrupt save/restore efficiency improvement Performance improvements in reducing register spilling…

  • [FAQ] 66AK2E05: How to load and run the ARM gel file on K2E EVM

    Part Number: 66AK2E05 Hi, How to load and run the ARM gel file on K2E EVM ?

  • [FAQ] 66AK2E05: How to load and run the DSP gel file on K2E EVM

    Part Number: 66AK2E05 Hi, How to load and run the DSP gel file on K2E EVM?

  • [FAQ] 66AK2E05: How to create "Target configuration" and do "Test connection" on K2E EVM.

    Part Number: 66AK2E05 Hi, How to create "Target configuration" and do "Test connection" on K2E EVM?

  • [FAQ] TMS320C6657: How to load and run the DSP gel file on C6657 EVM

    Part Number: TMS320C6657 Hi How to load and run the DSP gel file on C6657 EVM ?

View FAQ threads
Recommended For You