TI E2E Community
/etc... Amplifiers & Other Linear
/etc... Amplifiers & Other Linear Forum
I have a inductive transduver and I need convert the signal of transducer to a current/voltage signal.
I find this IC: http://www.ti.com/lit/ds/symlink/drv401-ep.pdf
Does anyone know a IC more simple? Because this IC has PWM output for example, that I don´t need.
I need convert the signal of inductive transducer for a signal that I can process.
The DRV401 is intended to work with a very special current sensor so I doubt that you would find it useful.
Can you explain what type of transducer you have? What are you sensing? Do you have information such as a data sheet on the transducer?
Thanks for your answer.
I haven´t technical information about my transducer. Is a inductive transducer, that measure linear distance with a relutance variable. The connection with a transducer are two wire...
It is difficult for us to provide meaningful advice without information on the transducer.
Most reluctance distance sensors have some sort of AC excitation from a second coil of some type. Is this the case? Other reluctance sensors have a permanent magnet that provides excitation but they sense motion of, for example, a toothed wheel.
In any case, a two-terminal inductive sensor must provide an AC voltage output. A simple voltage amplifier using an op amp would would be a good start. If you can provide more detail such as frequency, voltage level, etc, we may be able to offer more advice.
In this case, the transducer doesn´t has AC excitation or other type of excitation. A two-terminal provide the value of a variable coil. I think that is how a potentiometer: with variation of distance, the transducer variable a induction (instead resistance in potentiometer).
Sorry, but we cannot provide any help without information on the transducer.
Thank you for yours answers!
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.