I need help in designing a preamplifier for piezoelectric sensor. Capacitace is around 1000 pF and resistance is 1 Gohm .
Try a charge amplifier.
Regards, Neil P. Albaugh ex-Burr-Brown
Thanks for your attention. But can u help me with which op amp to go for and also some practical circuit models.
There are some other posts on the forum already dedicated to design with charge amplifiers. Perhaps you could search through some of the old posts for some design tips. Below is a presentation from one of the other posts by one of our Senior Applications Engineers, Thomas Kuehl.
Also if you download the TINA simulation software, Neil has created a pretty complete library of example circuits including one or more charge amplifier designs.
Regards,Collin WellsPrecision Linear
Regards,Collin WellsPrecision Linear Applications
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with respect to these materials. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.