HI,
there is a correct sequence to power up the device ( v1->v2 or vice versa )...
Regarding the settling time from a power on to a stable out?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
HI,
there is a correct sequence to power up the device ( v1->v2 or vice versa )...
Regarding the settling time from a power on to a stable out?
Hello Vittorio Iovannelli,
There is no specific requirement on the power up sequence.
Unfortunately we do not have characterization data to ensure a maximum delay time between power-up and valid output.
Best regards,
Jose