OP AMP slew rate and DC input

Hari,

  The slew rate is a dynamic performance spec and is not important if you are looking at a dc/low frequency signal. See the precision lab video below on the importance of slew rate.

-Samir

Hi Hari,

When Using DC Slew rate sometimes can be considerable factor.If you are concerned about initial rise time ,Then slew rate should be considered.

Regards
Manjunath I

Hi Manju,

Could you please explain with an example .

Regards
Hari T O

Hi Hari ,

If you look at the waveform given below,the initial rise time is dependent on the opamp slew rate ..