Looking for Demo Application - TCA8418

Hook arm

Other Parts Discussed in Thread: TCA8418, TCA8418E-EVM, TCA8418E

We are using TCA8418 as keypad controller, but we found that the MAVRK project are not available any more, is there any one who can forward me a copy of the Demo Application - TCA8418?

Many thanks

Ho Arm

over 9 years ago

0 Rajan Arora over 9 years ago

TI__Intellectual 2175 points

Ho,
Let me check and get back to you.

Thanks,
Rajan

0 Hook arm over 9 years ago in reply to Rajan Arora

Prodigy 75 points

Dear Rajan,

thank you very much. If you happen have one, could you please forward me a copy of the demo code of TCA8418 to email: hookarm@gmail.com?

many thanks

Ho

0 Rajan Arora over 9 years ago in reply to Hook arm

TI__Intellectual 2175 points

Hi Ho,
TI does not support MAVRK any more. However, if you need code for TCA8418 can you use the EVM firmware code on this webpage? (www.ti.com/.../tca8418e-evm)

Thanks,
Rajan

0 Hook arm over 9 years ago in reply to Rajan Arora

Prodigy 75 points

Thanks Rajan, the website provides some test exe for the MSP430 application, but doesn't provide the demo code for TCA8418e-evm, I found TI prvoided the demo code for TCA8418/TCA8418e before, but the MARVK project is not available any more and I am not able to download the demo code for TCA8418 both for CCS or IAR. So, could you instruct me?

Many thanks

Ho

0 STEPHEN JIANG1 over 8 years ago

Prodigy 40 points

have you got the demo?could you share it with me?

0 Siby James over 8 years ago in reply to STEPHEN JIANG1

TI__Expert 5140 points

Hi Stephen,

Please refer to our EVM folder on ti.com (www.ti.com/.../tca8418e-evm ).

In the software section, there is EVM firmware and software available.

Thanks,
Siby

Interface

Interface forum

Looking for Demo Application - TCA8418