• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 32 subscribers
  • Views 349 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Output Resistance Value not matching the Table - TPL0501-100

Arun kumar81
Prodigy 250 points

I try to vary the output. resistance value Rwh , Rwl not matching the table value.

is any calculation required to get the output compare to the table? 

  • 0
    TI__Genius 16450 points
    Hello Arun,

    Thanks for the question.

    This is actually a mistake in this datasheet that we are currently in the process of correcting.

    RHW and RWL are backwards, so when at step 0, RWL is 0 ohms, when at step 255, RWH is at almost 0 ohms, as such, the ratio is also backwards.