SN65DSI83 MIPI DSI clock question

Arthur Huang

Other Parts Discussed in Thread: SN65DSI83, DS90CF386

Hi Team,

customer is evaluate the SN65DSI83 for MIPI to LVDS bridge, and they want to know if they don't use the external reference clock to generate the LVDS output clock, is it ok for the SN65DSI83 to accept the DSI clock range of 9Mhz ~ 12Mhz from nVidia TX1 module? Please advise. Thanks.

Regards,

Arthur

over 7 years ago

0 Arthur Huang over 7 years ago

TI__Expert 6065 points

Customer also want to know if the SN65DSI83 is suitable to connect to DS90CF386? Any hardware concerns?
Please advise. Thanks.

Regards,
Arthur

0 Joel Jimenez0 over 7 years ago in reply to Arthur Huang

TI__Mastermind 18655 points

Hello Arthur,

The minimum DSI HS clock input frequency is 40Mhz, however, you must determine the minimum clock frequency required to support the stream bit rate of the panel with the selected number of DSI lanes.

The SN65DSI83 is suitable to connect the DS90CF386.

Regards

Interface

Interface forum

SN65DSI83 MIPI DSI clock question