Hello,
I have a request for the dimensions and hole locations on the RS485-FL-DPLX-EVM. Can you help with that?
http://www.ti.com/tool/RS485-FL-DPLX-EVM?keyMatch=RS485-FL-DPLX-EVM&tisearch=Search-EN-Everything
Thank you for your time!
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello,
I have a request for the dimensions and hole locations on the RS485-FL-DPLX-EVM. Can you help with that?
http://www.ti.com/tool/RS485-FL-DPLX-EVM?keyMatch=RS485-FL-DPLX-EVM&tisearch=Search-EN-Everything
Thank you for your time!
Hi Jim,
Here are the board files and BOM for the RS-485 full duplex EVM. The board was done using cadence so the customer should use this to open the layout file. If they cannot let me know and I will go into the tool and measure stuff for them but I believe giving them the files provides them the most flexibility.