Frequent Questions

  • [FAQ] TDA4VH-Q1: What are the steps to build the GPU demo application lightweight-offscreen through the SDK?

    Part Number: TDA4VH-Q1 Tool/software: I want to be able to build and test the GPU test-application lightweight-offscreen demo shown here: https://github.com/StaticRocket/lightweight-offscreen I am currently on SDK 9.2 how can I do this?

  • [FAQ] IO-Link Transceiver Resources

    [Click here to return to Transceiver Homepage] Welcome to the IO-Link Transceivers E2E page! Listed below are a variety of resources to assist with the implementation of IO-Link! IO-Link Basics: IO-Link Overview IO-Link Sensor Transmitter…

  • [FAQ] AM6xx: How to get the TIFS Keywriter logs

    Part Number: AM625 Tool/software: The Keywriter is an application designed primarily for programming the keys and converting the device from HSFS to HSSE. During the keywriting procedure, one may encounter errors reflected by the non-zero value…

  • [FAQ] Can TXG support IEC-ESD for offboard connections

    FAQ: Logic and Voltage Translation > Ground-Level Translators >> Current FAQ TXG devices (both push-pull and open-drain) cannot support any level of IEC-ESD. However, IEC-ESD can still be achieved by using a protection device like the ESDS30x product…

  • [FAQ] How far apart can the two systems be with TXG I2C devices?

    Other Parts Discussed in Thread: TXG8122-Q1 Since the I2C protocol limits the allowable bus capacitance to 400pF (for Standard and Fast Mode) or 550pF (for Fast Mode+), similar requirements will need to be implemented on the TXG8122-Q1. There are…

  • [FAQ] Will TXG QFN packages support wettable flank?

    FAQ: Logic and Voltage Translation > Ground-Level Translators >> Current FAQ At the moment TXG QFN packages do not support wettable flanks. However, we are working towards supporting wettable flank packages once products are fully released. The QFN…

  • [FAQ] What is the leakage between 2 grounds?

    Other Parts Discussed in Thread: TXG1041 FAQ: Logic and Voltage Translation > Ground-Level Translators >> Current FAQ The leakage between two grounds can be found under the Electrical Characteristics section in the datasheet. Using the TXG1041 datasheet…

  • [FAQ] Can TXG be used as a simple level translator / buffer?

    FAQ: Logic and Voltage Translation > Ground-Level Translators >> Current FAQ The TXG product family can be used as a regular level translator (VCCA > VCCB or VCCA < VCCB) or in a buffer configuration (VCCA = VCCB). If a user doesn’t need ground shifting…

  • [FAQ] MCU-PLUS-SDK-AM263X: SBL QSPI ENET missing python file "enet_uniflash.py"

    Part Number: MCU-PLUS-SDK-AM263X Other Parts Discussed in Thread: UNIFLASH Tool/software: Hi TI experts, I'm trying to run the sbl_qspi_enet application on AM263x. I see that the documentation ( software-dl.ti.com/.../EXAMPLES_DRIVERS_SBL_QSPI_ENET_AM263X…

  • [FAQ] BQ25798: Recommended backup mode operation

    Part Number: BQ25798 Tool/software: Backup mode is expected to work as follows: Host software sets (arms) EN_BACKUP=1 while input source is attached at VBUS Input voltage fails below backup mode trigger point = %*VINDPM Backup mode engages setting…

View FAQ threads