Part Number: AM623
Tool/software:
Hi Expert,
Power-Up Sequencing refers to the datasheet to set up, but now I have a question about the power-up timing of the VPP voltage.
And the Figure 7-5. Power-Up Sequencing graphic shows Hi-Z. I don’t quite…
Part Number: AM6412
Tool/software:
In AM64x/AM243 devices, we are using DMSC core (M3 core) for doing Resets, individual core Reset, SOC Reset, Core or IP frequency settings and resource allocation and security operations .
We need to use SCI client…
Part Number: TUSB8041A Tool/software: Cascading USB hubs means to connect a root USB hub to the next tier which has another one or more hubs and few other devices and carrying forth in multiple tiers of hubs and devices . The USB standard specifies the…
Part Number: CC2340R5 Other Parts Discussed in Thread: SYSCONFIG , , CC2340R2
Tool/software: CCS Theia
Code Composer Studio is transitioning to Theia from Eclipse
Theia is an open-source initiative to provide a VS Code® “like” application framework…
Part Number: LMH1297
Tool/software:
SDI and Ethernet retimers provide a feature to capture:
1). HEO/VEO indicating horizontal and vertical eye opening
2). Additionally one can capture post equalized eye diagram as well.
Attached file discusses…
Part Number: BQ25756
Tool/software:
Hello, The BQ2575X ADC can measure the TS voltage, VFB voltage, input voltage, input current, battery voltage, and battery current. The ADC can also measure the system voltage if the SYS pin is present. The ADC…
Part Number: TDA4VH-Q1 Tool/software: Provide the steps to integrate SDL functional safety modules such as BIST, POK, VTM and TOG with the PDK Boot Application.
Part Number: AM62A3
Tool/software:
Hi,
a customer is using the AM62A and connects to an external ethernet switch with the RGMII interface. We are looking at the appnote
https://www.ti.com/lit/an/sprad07/sprad07.pdf
The design currently does…
Part Number: MCU-PLUS-SDK-AM243X Tool/software: Hi, AM243x MCU SDK includes an FSI internal loopback example, but I would like to test an external loopback using 2 boards. How can I do it?