• CDCM6208V1EVM: CDCM6208V1EVM or CDCM6208VEVM Schematic,PCB and BOM

  

  Tony Wang

  TI Thinks Resolved

  Part Number: CDCM6208V1EVM Other Parts Discussed in Thread: CDCM6208 , CDCM6208V2EVM Hello! Can you send me a set of source files of CDCM6208V1EVM or CDCM6208VEVM which include Schematic,PCB and BOM? My E-mail is 704837562@qq.com. Thanks a lot! Tony

  • over 3 years ago
  • Clock & timing
  • Clock & timing forum

• CDCM6208V1EVM: We used a spectrometer to test the spectral characteristics of the output at 40MHz, and it was obvious that there was spurs at the proximal edge of the spectrum.

  

  aiwen chen

  Part Number: CDCM6208V1EVM Other Parts Discussed in Thread: CDCLVC1104 , CDCM6208 This is schematic diagram. The clock comes from "a constant temperature crystal oscillator + clock buffer chip", the constant temperature crystal oscillator is Taiwan Taiyi…

  • over 2 years ago
  • Clock & timing
  • Clock & timing forum

• CDCM6208V1EVM: Design file

  

  Lidong Yu

  Part Number: CDCM6208V1EVM My customer is interested in CDCM6208V1EVM and want to design a new board, he want to know if we can share the design file of CDCM6208V1EVM, like PCB file.

  • over 3 years ago
  • Clock & timing
  • Clock & timing forum

• CDCM6208V1EVM: CDCM6208V1

  

  patrick nefos

  Part Number: CDCM6208V1EVM Derek, In you file for: "This is actually possible with PS_B set to divide-by-6 (400MHz). Y6 / Y7 divider could be set either to 4 or 5 to achieve 100MHz / 80MHz switchable. Try switching the frequency in Y6 / Y7 boxes between…

  • over 4 years ago
  • Clock & timing
  • Clock & timing forum
Answered

• CDCM6208V1EVM: Gate the clock outputs and timing

  

  patrick nefos

  Resolved

  Part Number: CDCM6208V1EVM Other Parts Discussed in Thread: CDCM6208 One more question. Is it possible to gate (turn off then re-enable the (4) 100 MHz) Y0-Y3. What is the time from enable to valid clock? - Thanks, Patrick

  • Resolved

  • over 4 years ago
  • Clock & timing
  • Clock & timing forum
Answered

• CDCM6208V1EVM: Are there Linux spi drivers cdcm6208?

  

  patrick nefos

  Resolved

  Part Number: CDCM6208V1EVM Other Parts Discussed in Thread: CDCM6208 Looking to use this CDCM6208 part as : 160 MHz in LVDS, All LVDS out, 160 MHz pass thru.to FPGA. Also, 80 MHz / 100 MHz that drive (2) AFE5832ZBV switching from 12 bit to 10 bit mode…

  • Resolved

  • over 4 years ago
  • Clock & timing
  • Clock & timing forum
Answered

• CDCM6208V1EVM: How should the pins of VDD_PLL and VDD_VCO be connected?

  

  user5318419

  Resolved

  Part Number: CDCM6208V1EVM Dear engineer ! Recently I am looking at the CDCM6208EVM file. I have two questions about the schematic diagram of the file 1.as shown in the figure, Is this pin connected as shown in the picture and then the external power…

  • Resolved

  • over 5 years ago
  • Clock & timing
  • Clock & timing forum
Answered

• CDCM6208V1EVM: Using the EVM for bring-up

  

  Elder Costa17

  Resolved

  Part Number: CDCM6208V1EVM Other Parts Discussed in Thread: CDCM6208 I need to do a board bring-up and I am wondering if I can use the EVM as an USB-I2C bridge to control the on-board CDCM6208.

  • Resolved

  • over 5 years ago
  • Clock & timing
  • Clock & timing forum

• CDCM6208V1EVM-CB

  

  Meng jeffrey

  TI Thinks Resolved

  I'm using cdcm6208v1evm-cb. 1. Use the 25MHZ crystal oscillator on the board to input the clock source, and the PLL output clock is normal.Output clock is normal, PLL lock indicator light is long.Use other clock (we in practical applications, the…

  • over 7 years ago
  • Clock & timing
  • Clock & timing forum
Answered

• CDCM6208V1EVM: Can we provide EVM BOM?

  

  [FAE] Andrew Wang

  Resolved

  Part Number: CDCM6208V1EVM Hi Team, Customer wish to have CDCM6208EVM BOM, please help! Thanks a lot. Andrew

  • Resolved

  • over 7 years ago
  • Clock & timing
  • Clock & timing forum

Didn't find what you are looking for? Post a new question.