Part Number: DAC12DL3200EVM Hello
In section 3.5 of the User Guide of DAC12DL3200EVM its recommended to give +12 dBm input power for the 6.4 GHz external DACCLK through connector J2. What is the Min. and Max. power level that can be given at this port…
Part Number: DAC12DL3200EVM Other Parts Discussed in Thread: DAC12DL3200 Dear
I want to need new NRZ configuration
I know that TI already supported NRZ Single DAC configuration
I can find LMK_100M_LMX_6400M_Mode2_NRZ_Single_DAC at below directory
…
Hi, Everybody
I resolved this issue by myself.
I found lvanlys.dll issue NI forum.
( https://knowledge.ni.com/KnowledgeArticleDetails?id=kA00Z000000PA60SAG&l=ko-KR )
This ticket is related that lvalys.dll error in LABVIEW 2019 env on AMD CPU.
So, I…
Part Number: DAC12DL3200EVM We have a need to produce Certificates of Volatility for the above two boards. Does TI have them or could create them?
Thanks.
Part Number: DAC12DL3200EVM We would like to use the DAC12DL3200EVM with both channels being DC coupled. We saw from the schematic that the board is shipped AC transformer coupled. Is there a way we can change the assembled components on the PCB (namely…
Part Number: DAC12DL3200 Other Parts Discussed in Thread: , LMX2592 , ADC12DL3200EVM Hi,
I want to read DAC12DL3200 Register DAC12DL3200EVM in Python 3 environment
But DAC12DL3200PG2 is base on Python 2 ver.
So I want to control direct access without your…
Delaney,
What you are seeing is images of the tone. If you need a tone at 6.5GHz, you will get an image at 6.3GHz. If you need a tone at 6.6GHz, you will see an image at 6.2GHz. This is based on the sample rate and mode you have selected. See attached…
Part Number: DAC12DL3200EVM Can I have the .STEP file for this Eval Board? I am unable to import the .BRD file into Altium to export a .STEP file as I have done for other boards.
Shaun,
Yes. The TSW14DL3200EVM was designed to work with our new high speed LVDS boards, the ADS12DL3200EVM and the DAC12DL3200EVM, which all use the FMC connector . All of the older LVDS TI EVM's used a different connector. If we built an adapter, then…
