Search tips
Showing 32 results View by: Thread Post Sort by

  • DAC60096: Doubling DAC output with OpAmp

    Part Number: DAC60096 I want to use an LM358N Dual OpAmp to double the range of each (pair) of outputs of the DAC60096. I have the DAC outputting -10V to +10V driving using the SPI bus no problem. I am trying to use an OpAmp to do the non-inverting voltage…
    • Answered

  • DAC60096: Simultaneous update of several DAC outputs

    Resolved
    Part Number: DAC60096 About one year ago, we bought this board: https://www.digikey.de/de/products/detail/texas-instruments/DAC60096EVM/7219320 . We have seen that the update of the DACs with the software from the manufacturer takes several seconds. This…
    • Resolved

  • DAC60096: Where can I find the TI DAC60096EVM GUI installer?

    TI Thinks Resolved
    Part Number: DAC60096 Other Parts Discussed in Thread: AMC7836EVM The DAC60096EVM user guide references the graphical user interface software. However I can't find a product page on TI's EVM product folder. Can you please provide a link to the GUI and…
    • Answered

  • DAC60096EVM: DAC60096 EVM Python Script

    Resolved
    Part Number: DAC60096EVM Hello Everyone, I’m Using the DAC60096EVM to control a Liquid crystal device. I would like to us Python Scripting to control multiple output at the same time. I would like to know if there is some Python script examples…
    • Resolved

  • DAC60096: Maximum load current

    TI Thinks Resolved
    Part Number: DAC60096 Hello Team, My customer would like to know what is the maximum load current of the DAC60096 chip? Thanks in advance Regards, _Renan

  • DAC60096: Power Sequencing

    TI Thinks Resolved
    Part Number: DAC60096 I have a few questions about the DAC60096. 1. What are the problems and effects when SDI has a voltage applied and the power rails are off. 2. What are the draw backs and problems with having the 3.3V powered but not the +/-12V
    • Answered

  • DAC60096: Header File Request

    Resolved
    Part Number: DAC60096 Hello, I am using the DAC60096 on a board design, to be used with an ARM based controller. I was wondering if I could get a header file for the DAC. Thanks, Andrew
    • Resolved

  • DAC60096: Supply current in RESET

    TI Thinks Resolved
    Part Number: DAC60096 What is the device supply current when reset is held low? We have a situation where several DAC devices are on the same SPI bus and only one needs to be turned on a time. If several DAC60096 devices are connected to the SPI bus,…
    • Answered

  • DAC60096: AVSS voltage when only 11bit unipolar DAC outputs are required

    Resolved
    Part Number: DAC60096 Hello, My customer uses only positive code, 0 to +2047, to get positive DAC output voltage, 0 to 10.5V. In this case, -12.6 to -11.2V voltage still has to be supplied at AVSS pins? Or AVSS pins can be connected to AGND voltage,…
    • Resolved

  • TLV9304: TLV9302/4 with DAC60096 or DAC43608

    TI Thinks Resolved
    Part Number: TLV9304 Other Parts Discussed in Thread: DAC60096 , DAC43608 , TLV9302 , , TINA-TI Hi Team, My customer would like to proceed with TLV9302/4 with DAC60096 or DAC43608. See below: 1. DAC60096 – The output signal of DAC60096 is (-10.5v) – (+10…

Didn't find what you are looking for? Post a new question.