Part Number: DS26LV32AQML Other Parts Discussed in Thread: DS26LV31QML Tool/software: Hello,
Is there any information on SEL (Single Event Latch Up) or TID (Total Ionizing Dose) of DS26LV31QML and DS26LV32AQML?
My customer couldn't find any information…
Part Number: DS26LV31QML Dear High Reliability team.
This part has 4 channel. but I use only 3 channel.
Should unused channels (input and output) be connected to GND or VCC?
Otherwise, Can I leave they OPEN?
thankyou
Part Number: DS26LV31QML Hi TI,
For the DS26LV31 differential line driver the data sheet indicate a DC output current per pin of ±150mA max and an Output Short Circuit Current with a high output shorted to Gnd of -160mA. Only one output shorted at a…
Part Number: DS26LV31QML Other Parts Discussed in Thread: THVD1552 , DS26LV32AQML , AM26LV32E , AM26LV31E , AM26LV31E-EP , AM26LV32 , AM26LV31 , AM26LV32E-EP Hi Dear,
Can DS26LV31QML be used for 422 signal transmission and reception? What signal does…
Part Number: DS26LV31QML Hi;
what is the output high and output low voltage (Voh Vol) of DS26LV31QML line driver and give the test condition to measure the same
Thanks
Midhun
Part Number: DS16F95QML Other Parts Discussed in Thread: DS26C31MQML , DS16F95 , DS26LV31QML Dear design support team.
I am confusing RS485 interface polarity.
According to TIA-485-A, when VA - VB is positive, the logic value is "0". this means…
Hi, kirby-san,
Thank you for your comment.
Which ESD ratings wil youl add during the next update?
DS26LV31QML → DRIVER pin 7kV HBM other pins 2.5kV HBM
or
All pins 4kV HBM
DS26LV32AQML → RECEIVER pin 6.5kV HBM other pins 2.5kV…
Tom,
We do not have a 3.3V class V differential driver or receiver.
We do have 3.3V QML military ceramic devices.
The DS26LV32AQML is 3.3V receiver.
The DS26LV31QML is 3.3V driver. However, the 5V class V level driver DS26F31MQML-SP can be used as…
