Part Number: DS90CR217 Other Parts Discussed in Thread: DS90CR218A , SN74AXC8T245 , TXV0106 , SN75LVDS83B , SN75LVDS82 Tool/software: Hi,
we are designing a system based on a camera and a frame grabber, and the communication interface is based on Channel…
Part Number: DS90CR217 Other Parts Discussed in Thread: DS90CR218A Dear Team,
My customer is facing an issue with the DS90CR217 regarding data transmission.
You can see below the detail of the issue, sent by my customer :
====================…
Part Number: DS90CR217
Hi All,
I'm developing one FPGA based System and using DS90CR217 high speed interface IC for Same.
When I uploading a ibis file For Signal Integrity simulation check it give me an error.
The Error screenshot uploaded below…
Other Parts Discussed in Thread: DS90CR217 , DS90CR216 Dear All,
Let me ask the following question about Decoupling capasitors of DS90CR217. According to Figure14 of the data sheet, a capacitor of more large value (0.1μF) than the others is located…
I am not sure it will work this way. Even though you have connected only 18 of the 24 data bits, the LVDS transmitter will still clock out 24 bits of LCD data. You need a part that will transmit 18 bits of data plus the 3 control signal, something like…
Hi Jamie,
The parts you are using are FPD-Link, where the receiver is designed to strobe on the falling edge.
There is an equivalent Channel LInk part where the receiver strobes on the rising edge. Please take a look at the DS90CR217 (Serializer)…
Other Parts Discussed in Thread: DS90CR218A , DS90CR217 Hello,
I am using a DS90CR218A / DS90CR217 serdes pair. For a new design I will be using an FPGA to do the serializing. Is the serializer just simply converting 7:1 or is there a synchronizing…
Other Parts Discussed in Thread: DS90CR218A , DS90CR217 Hello, We have an application in which we are using a DS90CR217 serializer and a DS90CR218A deserializer to transmit and receive data. This app must be able to operate at two different frequencies…
Hello, here is the document I referenced. I should have attached it.
7418.Camera_Link.pdf
I am designing a board that will interface with a camera that has full Camera Link capability. I want to bring that data into an FPGA and then transmit the…
