Part Number: INA333-HT I would like to use the High temperature INA333-HT among other High temperature chip.
I am currently hesitating between the 2 packages: HKJ and HKQ.
Could you provide me the following information:
PCB footprint advised for…
Part Number: INA333-HT Other Parts Discussed in Thread: INA129-HT Hello Guys,
Good day.
Just like to confirm: INA333-HT is Military qualified. Does it mean its okay for Avionics/Aircraft application?
Customer don't necessarily need Space grade products…
Part Number: INA333-HT Hi,
The footprint of INA333HKQ on the web site Ultra libraria looks inverted compared to the 3D model and the datasheet:
https://app.ultralibrarian.com/details/15d7a85e-103f-11e9-ab3a-0a3560a4cccc/Texas-Instruments/INA333SHKQ…
Part Number: INA333-HT Other Parts Discussed in Thread: INA129-HT , OPA2333-HT , INA128-HT Hello,
I have a question concerning the stability of the INA333-HT at 210 degC. The data states that if this device is going to be operated at 210 degC there…
Part Number: INA333-HT Other Parts Discussed in Thread: INA129-HT , OPA2333-HT , INA128-HT , Hello,
In datasheet it says- It is not recommended to use a gain <100 for high temperature (210°C) applications [Application Information,page 14 ]. I would…
Part Number: INA333-HT Other Parts Discussed in Thread: TINA-TI Tool/software: TINA-TI or Spice Models New user here..
I have used simulation tools before, but how do you get Tina-Ti to load a new model and run a simulation?
Part Number: INA333-HT Hi,
I am planning to use INA333-HT for high-temperature application. Which type of PCB board you recommend to use that survive 210 C?
Regards,
Bah
Part Number: INA333-HT could you provide a recommendation of the typical solder or electrical contact method for surface mount components with the operation temperature of 210°C
Is there a industry standard? Is there a reliable solution that TI uses
The Problem Solved:
The reason for the behavior is limited capability of the INA333-HT to drive loads at higher temperatures, over 110⁰C.
The implemented voltage divider acted as RL=1379 ohm load, which was too much to be driven by the INA333-HT.…
Part Number: INA333-HT I am specifying a INA333SHKJ component for a new high-temperature down-hole design. The datasheet shows two versions of the ceramic part (one with long leads) and the other gull-winged. The part I plan to use is the one with the…
