• ISO7341C: ISO7341CQDWRQ1

  

  Marko Zecevic

  TI Thinks Resolved

  Part Number: ISO7341C Tool/software: Hello, could I ask for help regarding the markings on your ICs? For example, we are using the ISO7341CQ (ISO7341CQDWRQ1, bought from Mouser) in some boards/projects that must have traceability of most components. …

  • 2 months ago
  • Isolation
  • Isolation forum
Answered

• ISO7341C: Pspice model

  

  Gerald

  Resolved

  Part Number: ISO7341C Other Parts Discussed in Thread: ISO6741 Hi Experts, Our customer is looking for Pspice model for ISO7341. I only see IBIS model. If Pspice model is available, please share if ok. Thank you. Best regards, Gerald

  • Resolved

  • over 1 year ago
  • Isolation
  • Isolation forum
Answered

• ISO7341C: layout considerations

  

  Asaf Abraham

  Resolved

  Part Number: ISO7341C Hello, We are using the ISO7341C for RS485 isolation. Due to layout constraints I routed the DE, TXD and RXD at the bottom layer just beneath the ISO7341C, as it can be seen from the picture: I guess that that this route can decrease…

  • Resolved

  • over 2 years ago
  • Isolation
  • Isolation forum

• ISO7341C: Solder ability test failed .

  

  user5902304

  TI Thinks Resolved

  Part Number: ISO7341C Solder ability test failed .

  • over 3 years ago
  • Isolation
  • Isolation forum
Answered

• ISO7341C: How about the output in our case.

  

  Kengo.Y

  Resolved

  Part Number: ISO7341C Hi team. I'd like to know about the output in our case. What type of the output when VCC2=5V、VCC1 and EN1 = No input ? Sincerely. Kengo.

  • Resolved

  • over 4 years ago
  • Isolation
  • Isolation forum

• ISO7341C: Check for alternatives with 1.8V VDD.

  

  KIM Andy

  TI Thinks Resolved

  Part Number: ISO7341C Other Parts Discussed in Thread: ISO7041 , , ISO7741 Hi Our customer is using ISO7341CDWR but wants to use VDD voltage as 1.8V. Please check if there is a possible IC.

  • over 5 years ago
  • Isolation
  • Isolation forum

• XTR111: XTR111

  

  Chirag Panchal2

  TI Thinks Resolved

  Part Number: XTR111 Other Parts Discussed in Thread: DAC8563 , ISO7341C , MSP430F67791A , XTR300 , DAC8771 , ISO7721 , ISO7741 , AMC3301 , OPA197 , AMC3302 , TINA-TI , LM7705 Hi I am looking to build a signal converter/ isolator device that converts mV signal from…

  • 4 months ago
  • Amplifiers
  • Amplifiers forum

• ISO7341C: FIT-rate missing

  

  JAP

  TI Thinks Resolved

  Part Number: ISO7341C Hi, DPPM/FIT/MTBF estimator is not finding any data for following codes: ISO7341CDWR ISO7320CDR ISO7310CDR Can you provide FIT-data to me please? It would be great if this data is available in TI.com. Rgds, Juha

  • over 6 years ago
  • Isolation
  • Isolation forum
Answered

• ISO7341C: Need of pull up on I2C line ?

  

  Lee, Sam

  Resolved

  Part Number: ISO7341C Other Parts Discussed in Thread: TPS23861 , ISO1541 , ISO1540 Hi team, ISO7341C will be used between PSE(TPS23861) and MCU for I2C interface. Can you please review below schematic? -. Does it need pull up resistor on I2C line? -. I…

  • Resolved

  • over 6 years ago
  • Isolation
  • Isolation forum

• ISO7341C: ISO7341 internal structure material

  

  user4206199

  TI Thinks Resolved

  Part Number: ISO7341C Dear I need below material for ISO7341 because the certification body needs to provide 1.whether the internal isolation of two capacitors?and what is the capacitance value? 2.what is the AC or DC pressure for one minute? 3.what is the distance between…

  • over 7 years ago
  • Isolation
  • Isolation forum

Didn't find what you are looking for? Post a new question.