Part Number: LMH6553 Other Parts Discussed in Thread: TINA-TI Dear TI,
Although LMH6553 is your company devices, PSpice for TI restrict the number of probe on the testbench using it.
So I have to use TINA-TI, but I cannot do TINA-TI simulation to get LMH6553…
Part Number: LMH6553 To whom it may concern,
I would like to you tell me regarding input voltage on LMH6553.
will you please confirm to attached file?
Best regards,
Inquiries about LMH6553_20201001.pdf
Part Number: LMH6553 Hello,
Please advise,
Is there any Single-Ended to Differential amplifier such as the LMH6553 (for driving RF ADC),
with Limiting Clamp, but for higher BW?
Thanks,
Max
Part Number: LMH6553 Hello team,
The feedback resistor is recommended on the datasheet as below.
In case of increasing it to make a gain higher, what are the main concern and risk? (I can guess the bandwidth will get lower. Could you advise if there are…
Part Number: ADS5407 Other Parts Discussed in Thread: LMH6553 Hello team,
I'd like to check if there is any concern or design notice for ADS5407 analog input when it is combined with LMH6553?
Thanks in advance. S.Sawamoto
Part Number: LMH6553 Hai My name is udhay.
Recently we purchased LMH6553MRE/NOPB. We assembled the part in board.
We have designed to use split supply mode. When we are giving the both supplies +5V and -5V the device getting heated and taking current around…
Part Number: LMH6553 Other Parts Discussed in Thread: TINA-TI , Tool/software: TINA-TI or Spice Models Hello,
I've encountered some issue when trying to import the LMH6553 Pspice Model,
I've imported the .mod file from Ti website http://www.ti.com…
Part Number: LMH6553 We are looking to introduce the LMH6553 fully differential amplifier with output limit clamping to our design, but we are having problems understanding the datasheet regarding the noise data.
The datasheet shows two graphs, in figures…
Part Number: LMH6553 Follow up questions relating to this post:
1. What is the layer structure for this board? I would like to know how far the ground plane on layer 3 is below the feedback tracks on layer 2.
2. In the LMH6553SDEVAL SNOA528A document…
Part Number: ADS52J65 Other Parts Discussed in Thread: LMH6553 , Hi,
I am in the process of developing an ADC PCB. I intend to use the ADS52J65 ADC, for which I have already performed initial tests with your evaluation board to verify the basic functions…