Part Number: LMH730216 Hello,
I desire to use the LMH730216 to evaluate an op amp, but the eval board is bare and there are indications as to the size of components to be used on the eval board. The part datasheet provides values, but not size of components…
Other Parts Discussed in Thread: LMH730216 , OPA695 Hi,
we need the layout file of LMH730216 (high-speed OP, SOT-23) as a reference. how to get the layout files?
Best regards,
kerb
Part Number: LMH6703 Other Parts Discussed in Thread: LMH730216 , LMH730316 Hi Team,
We would like to ask for your assistance to the customer's inquiry below.
I ordered the LMH730216 Evaluation PCB. With RG=RF=560 ohms, I have about 4 dB of overshoot…
Part Number: LMH730316 Other Parts Discussed in Thread: LMH730216 , , DUAL-DIYAMP-EVM We are designing an instrumentation amplifier based on the LHM6703 SOT-23-6. There was a previous request for the LMH730316 gerber files. TI replied that they didn't have…
Part Number: LMH730316 Other Parts Discussed in Thread: LMH730216 Hi,
Is it possible to get a copy of the board design files or at least the gerbers for the LMH730316 eval board?
Thanks,
-Levi
Hi Jeff,
I have attached the board information for the LM730216 which replaced the CLC730216 (I cannot locate the CLC730216 information, as it is too old).
/cfs-file/__key/communityserver-discussions-components-files/14/0003.LMH730216-TOP.pdf
/cfs-file…
Hello Sagar,
There are several boards available that can be used in the trans impedance configuration, but they are not optimized for low current operation and may result in noise/leakage at pA levels.
A trans-impedance amplifier is basically an inverting…
Hello Hooman san, Thank you for the reply and sorry...I made a typo. Actual RL is 100ohm. Not 10ohm.
If we measured LMH6702 SOT-23 PKG specification with LMH730227, is the specfication worse than datasheet specification which was tested by LMH730216? Best…
