Part Number: LMV796-Q1 Other Parts Discussed in Thread: TLV9061-Q1 , TLV9062-Q1 Hi
Can you suggest Q-grade and dual channel version of LMV796-Q1 ?
thanks!
Part Number: LMV796 Dear TI team:
Please take a look at the C85 in the circuit below. What does this capacitor do?How to select capacitance value?
Thanks!
Regards!
Eric Shen
Part Number: LMV796
Dear Team: I asked a question on another post, Ron Michallick help relay to me, a circuit and a formula were provided.
I want to know how this formula works? In my opinion, VF1(out)= (Rp+R5)/R5 * (IG1)*Rs, Rp=R6*R7/(R6+R7). I don…
Part Number: LMV796 Other Parts Discussed in Thread: LM2904 Dear Team:
Please check the schematic as below:
Customer used the IGBT_GND for LMV796 reference GND, and the input is HV_GND, so does the input is a negative voltage, and the output is also…
Part Number: LMV796-Q1 Other Parts Discussed in Thread: LMV796 , OPA365-Q1 Dear team,
please help with below:
Is it possible to use LMV796-Q1 with input voltage of (V+) +0,3V and/or (V-) -0,3V ?
I would expect this comes down to the allowed injection…
Part Number: LMV796 Other Parts Discussed in Thread: OPA2376 , TLV9062 If power stage working frequency around 500KHz, how to select right OPA for Current detect real-time ?
Part Number: LMV796 Dear TI: My customer need a solution to monitor IGBT current, they want to keep the time from detecting the current to turning off IGBT within 5us. The purpose is when detect IGBT short, the circuit can quickly respond and turn off…
Other Parts Discussed in Thread: LMV796 Dear TI engineers,
I am making analog front end in eagle using LMV796 low noise op-amp, but I am unable to find Schematic symbol and footprint in the eagle library. Do I have to create custom symbol or there is…
Hi Ishara,
I do not see any advantage to having the LMV796 buffer. The LMP7721 has plenty of output drive, quite capable of driving the ADC by itself. The buffer just adds another source of offset and drift. In fact, the LMV796 is based off the LMP771x…
Other Parts Discussed in Thread: LMV797 , LMV796 Hello, I'm trying to simulate the LMV796/797 op-amp in SPICE and I'm running into a model where the op-amp rails on the positive end at 4.1V. It's a rail-to-rail amplifer, so I expected that rail to be…
