Part Number: LMX2492EVM Other Parts Discussed in Thread: CODELOADER Hello,
I have a few questions about the LMX2492EVM:
How can I configure this board to output starting from the lowest of the advertised frequency range? (500 MHz)
What is the…
Part Number: LMX2492EVM Other Parts Discussed in Thread: TICSPRO-SW , PLLATINUMSIM-SW Tool/software: Linux Hi all,
I will possibly work with an LMX2492EVM evaluation board in my lab and the point is that the board will be used in a system which contains…
Other Parts Discussed in Thread: LMX2492EVM , USB2ANY Hello,
Recently I purchased the LMX2492EVM.
I am interested in integrating the entire LMX2492EVM & USB2ANY in my product, but I want to add my own HMI/GUI.
In order to do that, I need the API…
Other Parts Discussed in Thread: LMX2492 , CODELOADER Hi guys,
I am using the LMX2492 evaluation board in my project to synthesize a sawtooth ramp that needs to ramp from 2.35 GHz to 2.45 GHz (RF/4 channel). I have managed to generate a continuous frequency…
Part Number: LMX2594EVM Other Parts Discussed in Thread: USB2ANY , LMX2492EVM , LMX2492 Tool/software: Hi Texas team,
We want to use LMX2594EVM board for our application. We have some enquiry about it which is given below,
1. Is it needed to buy separate…
Part Number: LMX2491 Other Parts Discussed in Thread: LMX2492EVM We are using the LMX2491 in combination with a 24GHz Radar Frontend what has a divide by 16 output for an FMCW radar. For this we need the ramp/chirp feature of the PLL chip itself. I've…
Hi Maxim,
The firmware needs to be updated to using the GUI, you can refer to another thread below.
https://e2e.ti.com/support/clock-timing-group/clock-and-timing/f/clock-timing-forum/1434161/lmx2492evm-usb2any-no-firmware-update-bottom
BRs,
…
Part Number: LMX2492
Hello,
I want to use the LMX2492 in ramping mode (I have a LMX2492EVM board). When I tried to measure the phase noise in CW at the lower ramp limit frequency, it turned out that the part generates high level of wandering spurs…
