Hi Arthur, just getting back to my desk. Thank you for the reply- this is good information. Per the above I understand that the EMU0/1 pins should be wired up. On the Beagle end (per schema), they are already pulled up to 3.3v with 4.7k's on the CTI-20…
I am using an LP-XDS110 for debugging a TMS570LS0914 based board. It works great, and the serial port on the LP-XDS110 is quite handy.
You can see my design at https://github.com/AMSAT-NA/PacSatFSKBoard and there some documentation there in the docs…
Part Number: LP-XDS110 Other Parts Discussed in Thread: TMS320F28384D , ENERGYTRACE , TMS320F28379D Tool/software: Hi,
We want to use LP-XDS110 launchpad debug interface with our custom TMS320F28384D.board. We could not find pin description for the…
Part Number: TMS320F28379D Other Parts Discussed in Thread: LP-XDS110 Hi,
Is it possible to debug and program my TMS320F28379D custom board using only the 10-pin header in the LP-XDS110? The nTRST pin from the microcontroller is pulled-down by a 2.2k…
Part Number: TMDSEMU110-U Other Parts Discussed in Thread: TMS320F28031 , , LP-XDS110 , LP-XDS110ET , UNIFLASH Dear TI Support Team,
We are currently looking for an alternative debug probe to program our custom board equipped with the TMS320F28031 …
Part Number: LP-XDS110 Other Parts Discussed in Thread: TMDSHSECDOCK Hi,
We have anew LP-XDS110 and want to debug F28379D controlcard on TMDSHSECDOCK docking station. We did not have any problem with XDS100v2.
On the controlcard;
A.SW1 >> pin1 and…
Part Number: LP-XDS110 Other Parts Discussed in Thread: IWRL6432AOP , UNIFLASH Tool/software: I am designing a custom board containing the IWRL6432AOP device and need to add a connector for the LP-XDS110 debug probe. I have tried finding information on…
Part Number: TMS320F280039C Other Parts Discussed in Thread: LP-XDS110 , Hello,
I have recently purchased an LP-XDS110 to program and debug the TMS320F280039C . I am currently designing a custom board and would like to confirm the correct implementation…
Part Number: LP-XDS110
Tool/software:
Hi team,
This query is for AM62x or AM64x
I have a customer copying the XDS110 implementation on the SK to custom board.
Customer is looking for guidance on programming the XDS110 chip.
Please let me know…
Hi,
GND, SWDIO, SWDCLK, VDD is mandatory and nRST is recommended.
If BSL is not used, you don't need to lead BSL invoke out.
But for CTI-20 pin, there is no UART supported, you might need Auxiliary:
Another good way is: I would recommend you…
