Part Number: SN65LVDT41 Other Parts Discussed in Thread: DS90LV011A , DS90LV012A Hi,
I am trying to extend my SPI bus by 24" using your sn65lvdt41 and sn52lvds14 driver IC's and I cannot seem to get things to work. This is my setup:
( CortexM4…
Part Number: SN65LVDT41-EP Hello,
Could you please check, why the available EP report seems to be incomplete with a lot of missing information!
Best regards
Part Number: SN65LVDT41 Other Parts Discussed in Thread: SN65LVDS4 , DS15BR401 Is there a similar product to SN65LVDT41 available from TI, whereby the input/output non-LVDs signals are CMOS1.8V compatible (i.e. V_IH < 1.8, V_OH < 1.8V).
In particular…
Part Number: SN65LVDT41 Other Parts Discussed in Thread: SN65LVDT14 Hi team,
My customer is using SN65LVDT41 and SN65LVDT14 to transfer signal in two boards. And the two boards are powered in two different isolated power supply. During their test, they…
Part Number: SN65LVDT41 Other Parts Discussed in Thread: TPD4E05U06 Hi,
I'm using the SN65LVDT41 on a board at 3 locations to extend an SPI bus running at 42 Mbps. A few instances of these devices have ceased to function for reason(s) that are TBD. I…
Part Number: SN65LVDT41 Other Parts Discussed in Thread: SN65LVDT14 , DRV8860 Regarding the VIH levels for the D or R inputs of the SN65LVDT14 and SN65LVDT41, can I assume that these inputs can safely tolerate 5.7V? The reason I ask is that I plan to drive…
Other Parts Discussed in Thread: LM306 , UCC27517 , TLV1805 , SN65LVDT41 , AM26LV31 Hi,
we are using a SPI-transmission in a rough environment with random transient fields, which are sometimes disturb the transmission.
The idea is to shift the levels from…
Part Number: SN65LVDT41SN65LVDT41PW
Theta JC and Theta JB are not provided in the datasheet, can you provide those package thermal resistances for this component?
What is the recommended operating Tj (Junction Temperature)?
Part is rated for -40…
Part Number: SN65LVDT41 Other Parts Discussed in Thread: SN65LVDT14 , I have tested SN65LVDT14 and the result is below.
1A
1B
1R
1.1
1.4
0
1.4
1.1
3.3
2A
2B
2R
1.1
1.4
0
1.4
1.1
3.3
3A
3B
3R
1.…
The average data rate does not matter; what is the SPI clock frequency?
Just using single-ended signals with buffers (e.g., SN74LVC125A, SN74HCS125) at both ends is possible. But if you expect a noisy environment or a ground shift between the two boards…