Part Number: LSF0108 Other Parts Discussed in Thread: TXU0104 , SN74AXC4T774 , SN74LV126A , SN74LXC8T245 , SN74LV125A , SN74LXC8T245-Q1 , Hi,
We are planning to use LSF0108QPWRQ1 for bidirectional GPIOs of our processor board, wherein each line can be configured…
Hello,
For 1.8 V to 5.0 V, we have the LXC family. The SN74LXC8T245 is rated from 1.1 V to 5.5 V with an enable pin. However, the prop delay is a little higher one these devices.
For 1.8 V to 3.6 V, we have the TXV family. The TXV0108-Q1 is rated from…
Part Number: TXS0108E-Q1 Other Parts Discussed in Thread: SN74LXC8T245-Q1 , TXU0304-Q1 , SN74AXC8T245-Q1 , TXU0104-Q1 , TXU0204-Q1 Hi team
There is a good new that we DIN TI TXS0108E-Q1 !
The end application is Automatic Parking sensor!
Cause the io port…
There is no similar device that supports 5 V.
You could use an 8-channel translator like the SN74LXC8T245-Q1. If the direction does not need to be changed dynamically, use the TXU0204-Q1.
Part Number: TXS0108E-Q1 Other Parts Discussed in Thread: SN74LXC8T245-Q1 , Hi Team,
In the datasheet, it specs that OE must be low if VCCA or B are powered off. Can you please help me understand the device behavior if OE is not kept low and VCCA or B is…
Part Number: SN74LVC8T245-Q1 Other Parts Discussed in Thread: SN74LXC8T245 , , SN74LXC8T245-Q1 Hi Team,
My customer observe that SN74LVC8T245-Q1 will have a high level pulse during power up even when OE pin pulled up to VCC. But in the datasheet, it says…
Part Number: SN74LVC16244A-Q1 Other Parts Discussed in Thread: SN74LVTH16245A-Q1 , SN74LXC8T245-Q1 , TXS0108E-Q1 Hello Team,
My customer is looking for a 12-bit bidirectional buffer with AEC-Q100 qualification and small package. Would you please recommend…
Part Number: TLIN2022A-Q1 Other Parts Discussed in Thread: LSF0108 , , SN74LXC8T245 Hi,
We are using TLIN2022A-Q1 on our design. But we found that the IO voltage of TLIN is 2-5V. But our MCU IO is 1.8V voltage. Do you have any recommendation for level…
Part Number: SN74LVCC4245A Other Parts Discussed in Thread: SN74LXC8T245 Hello,
I would like to know about glitch caused by switching Direction.
I measured waveform at B8 pin the figure below, I have noticed glitches occuring.
OE:always "ENABLE", A8=…