Part Number: TL072 Hi team,
I’m currently designing op amp based 16bit LED driver for controlling arrays of 14 high CRI LEDs.
I build the schematic shown below on pcb, but I have some issues with stability. I try a lot of different values for the…
Part Number: TL072 Hi, expert
My customer is using TL072 to do current sampling in inverter, they add U current and I current up to W current. The power supply is +/-15V, and input signal frequency is less than 50Hz.
They found there are random high output…
Part Number: TL072 Other Parts Discussed in Thread: , LM317 , LM337 , TL074H
Hello,
Our customer wants to know the requirement of "Power up ramp rate" for their internal system Design Review.
On SLOS080R datasheet, I could find following specification…
Part Number: TL072 I am using TL072I device with ±5V power supply rails. The datasheet only provides Common mode input range specs for ±15V supply. Please provide common mode input range specification for ±5V power rails.
Also...the…
Part Number: TL072A Team,
What is the main difference of these two devices?
Our customer has this question: why TL072ACPE4 costs more than a TL072IP?
Thanks for your time.
Chris
Part Number: TL072 Other Parts Discussed in Thread: OPA627 TL072C input voltage VDD15V VSS-15V
Temperature is ok
After sometimes , I found IC broken , VDD and VSS is short circuit. I want to know why the phenomenon occurs 3 times .
schematic:
TL072 make…
Hi Kai,
I just tested the preamp and it sounds amazing!!! Thanks for all your help. I certainly could not have done this without your help!!! And I also could not have done this without a TI tl072!!! Check out the finished project:
https://www.instagram…
Part Number: TL072 Other Parts Discussed in Thread: TL074H , TPA3116D2 , TLV9054 Hi,
A problem in the attached circuit is the pop noise, that is heard in the speakers at the output of IC1, received at its input, perhaps from the incorrect design in AC. …
