Part Number: TLV9002 Hello Team, I want to design a temperature measuring system using TLV9002SIYCKR. The following is the circuit designed. The NTC temperature sensor used is NTCLE350E4103FLB0 . The required temperature meaning range is -20 °C to 70°C.…
Part Number: TLV9002
Hi team,
Is there any difference in characteristics between TLV9002 (TLV9002IDR) and TLV9002-Q1 (TLV9002QDRQ1)?
I’m looking for alternative for TLV9002IDR. TLV9002QDRQ1 seems to be the one.
As I checked the both datasheets…
Part Number: TLV9002 Dear TI members,
I did simulation with TINA for TLV9002 voltage follower but, the result of AC transfer characteristic analysis is wrong.
could you review my simulation setting or circuits ?
Best regards,
1333 - Stability 3 - Problem…
Part Number: TLV9002 Hi,
In the spice model of the device (file TLV9002S.cir), it seems that there is an issue at the line 261 : R1 N4 OUT 1M => node N4 is unconnected (subcircuit CNTL_0)
What should be the correct node ?
Thanks for any help
Part Number: TLV9002 Other Parts Discussed in Thread: INA350 Hi Team, I want to design a circuit that measures the readings from a strain gauge. The Bridge resistance is 350 Ohms. The excitation voltage is 12V. I am following this application note as my reference…
Part Number: TLV9002 Hi
I am now promoting TLV9002 to block SGM358 in my account, could you help with support needs?
Confirm whether TLV9002 is P2P to SGM358;
Provide the comparison table between TLV9002 and SGM358;
Wish to get your help to block…
Part Number: TLV9002 Other Parts Discussed in Thread: TINA-TI I am designing a circuit using the TLV9002 and would like to check the gain margin and phase margin to confirm the stability of the circuit.
Is there a simulation model using TINA-TI to confirm…
Part Number: TLV9002 Hello,
I was looking into the input offset voltage rating over the temperature. So if I take the example of TLV9002, the datasheet says that on normal conditions max is +/- 1.6mV and over a temperature range, max is +/- 2mV.
The Vos…
Part Number: TLV9002 The bode plot of the single supply non-inverting configuration of TLV9002 is as shown:
I am not able to understand the reason for this unexpected response. The gain is in negative and the -3dB cutoff is around 940k. Since it is…