Part Number: XTR105 Hi
I need to convert 3 wire rtd input converted to single ended signal. XTR 105 is the chip designed for this. The problem is my power supply to the chipset is 3-3.9 V. The single ended signal has to be 0-3V.
3 wire RTD will be measuring…
Part Number: XTR105 Tool/software: WEBENCH® Design Tools Dear Sir ,
Kindly send me the simulation model for the XTR105 PT100 to 4 to 20 mA transmitter
so that I can use the file in the TINA software
with best regards
K. Ganapathy
Hi Saeed,
For temperature sensing using thermistor, it would be difficult to make to linearize the entire temperature range, which you asked from -45C to 105C. As you may see that the i_out has a curvature if the temperature sensing range is wide. For…
When I take the material and go to the ti.com website for that material, true in fact it is not a valid material name - it is a valid product data sheet for part XTR101 product family.
DATA SHEET
document-pdfAcrobat
XTR101: Precision, Low Drift 4-20mA…
Part Number: XTR105 Good morning,
I used XTR105 with RTD, piezo bridge and potentiometer without problems.
In the new application I connected a humity sensor (Homeywell HIH-4000-001) to the Vin inputs of XTR105, the prototipe works OK.
I checked again…
Part Number: XTR105 Dear Collin,
Is it possible to remove this post from the forum discussion, because I don't want to display all the schematic and PCB designs to others.
Regards
Udhay
Part Number: XTR105 Hello All,
For the XTR105-DIE (Ref. Datasheet page 3 http://www.ti.com/lit/ds/symlink/xtr105-die.pdf ) it shows pad number 3, 4, 5 and 6 as an “RG”.
For the XTR105 device (Ref. Datasheet page 2 http://www.ti.com/lit/ds/symlink…
Part Number: XTR105 Other Parts Discussed in Thread: XTR108 HI Friends,
currently i'm developing RTD to 4-20mA converter using XTR105. this is loop powered IC so I'm worrying, what if someone make the connection in reverse direction. so I'm confused about…