We cannot make guarantees for transducers, but we have seen customers have success using transducers in the 3-4 MHz range for various liquid and solid ToF applications. I recommend the following resources for learning more about transducers and transducer…
Chester,
I tried the debugging steps that you mentioned. None appeared to fix the problem. The verbose flag resulted in the following output to console,
CORTEX_M4_0: GEL Output:
Memory Map Initialization Complete
CORTEX_M4_0: Writing Flash @ Address…
Hi,
I am stuck with reading the register value from the device(SC16IS740) which is interfaced with RM46L852ZWT(I2C).
Can you please guide me as where i am going wrong.
The register read cycle as follows
SC16lS740_ADDR = 0x4C as A0 = 3.3V A1…
IRS-B210ST01-E.pdf tiduau1a.pdf Dear Thomas
I have few question
a) Can you please explain each stage of the attached circuit named as TI.pdf
b) Can you please explain each stage of my schematic.
The sensor used in both circuit is the same, i do…
Hi,
I get it, so you want to know how to connect MSP430 with debugger. You need to connect them together through JTAG(4 pin) or SBW(2 pin) and GND, 3V3.
The documents what you want. One tells you how to connect MSP430 with debugger. And another one…
Hi Edwin,
R&D is requested by his customer to have the worst case's simulation result. His customer replied him "Capacitor value derated with DC voltage, tolerance and dielectric derating over temperature. L can be derated using DC current temperature…
Hi Samuel,
You are absolutely correct, it looks like the GPO1 row of the sequencer is blank in the latest revision. I've attached a fixed version where it properly controlled by CTL1 and BUCK6_PG again and will update the one on the web. Thank you!…
Part Number: 66AK2L06 Other Parts Discussed in Thread: TCI6630K2L Hi all,
I have worked on booting up secondary ARM core(aka CPU1) on 66AK2L06 almost two weeks with failure all the time.
I am using ti-processor-sdk-linux-k2l-evm-03.03.00.04(and also…
Dear George,
1) Attached Adc415.pp.txt is for CCS Ver 4.1.5 Adc415.pp.txt
also building option for CCS version 4.1.5 are
"C:\\ti\\ccsv5\\utils\\bin\\gmake" -k all 'Building target: Hertz_VAF_Meter_29thmarch14.out' 'Invoking: MSP430 Linker' "C:/ti…
Wayne,
A belated Welcome to the DLP section of the TI E2E Community.
I am very sorry that your question appears to have gotten overlooked until now.
Please look at the attached document. It should answer quite a few of your questions. If you still…
