ido amgar said: we notice that the only the file USS_userConfig.h is being used, the other two are not.
It depends on if you have enabled in the USS_userConfig.h that USS_ENABLE_ABSTOF_LOBE_OFFSET_CORRECTION and USS_ALG_VFR_CALIB_MODE
ido amgar said: vol…
Other Parts Discussed in Thread: MSP430G2553 , MSP430F5528 , MSP430F5338 , MSPDRIVERLIB There are a few things that can cause an EVM to not connect to the GUI on the computer. Below walks through some common troubleshooting steps to fix EVM connectivity issues…
It was a typo ... the name is fram_ro_start ... This is a capture from a training on FRAM named MSP430 workshop ... about 14 minutes into the video.
www.ti.com/.../msp430-workshop.html
It looks as if the values that you enter in the GUI reach to the…
Hi Mathias,
We have not made any updates to the MSP430 FW so you should not need to update the firmware within the EVMs MSP430FR2355. Currently we have not found any bugs related to the MSP430 firmware so, at this time, we do not expect to release a new…
Hello,
You can connect the ULC1001-DRV290XEVM to a computer with a USB2ANY to control the EVM with our GUI. This allows for quick and easy optimization of ULC1001. To test the device in a production like state, you can use the on board push buttons. In…
Part Number: EVM430-FR6047 I'm using MSP430-FR6047 PCB with USS Design Center and MSP430FR6047EVM_USS_Demo project.
Design Center GUI and demo project versions are 02_40_00_00.
I have some questions in USS Demo project.
(USS_Config\USS_userConfig…
Hi,
Unfortunately TIDA-010030 doesn't support MSP430 FW, I will suggest you to refer below code examples to create your own FW.
SLUC583 — bq769x0 I2C Sample Code With CRC
Even without FW programmed in MSP430, you can still use TI GUI to check if…
Part Number: TDC7200EVM Other Parts Discussed in Thread: UNIFLASH , TDC7200 I have been trying to use the TDC7200EVM and accompanying GUI to perform TDC-based ToF measurements, and I am running into a major hurdle. I have procured a MSP430F5529LP (the…
I expect USB2ANY uses ordinary MSP430 I2C code, which is arcane but not inscrutable. I'm not sure seeing it would be all that informative.
What's opaque (to me) is the register setup -- which registers need to be set to what to actually accomplish…
Part Number: DS125DF1610EVM Other Parts Discussed in Thread: USB2ANY I installed the snlc055e (SigCon Architect EVM GUI setup with RTE) on my windows 10 PC. Turned on the 2.5V power supply, connect the USB to the PC (also tried to connect USB first then…