Other Parts Discussed in Thread: DM3730 Hi,all
I have just the board and CD of embest and when powered up with no sd card it shows up linux environment.
Though new to linux I know c programing.
Now beginning with this new product and manual given…
Attached are 2 parser preprocessed compiled files. First is the working version. Second is the version that causes an abort (after a few hours of runtime). Below is the copy of the parameters during the build (version is embedded).
"C:/ti/ccsv5/tools…
Hi Shimizu
The ADC12J4000 board was updated using a different clock synthesizer. To support this newer version that is now being sold, the EVM GUI also needed to be updated.
The board the customer has is the earlier version, and the currently linked…
Hi Guy Yater,
Thanks for the response.
When I was going through http://www.ti.com/lit/sg/sszb130b/sszb130b.pdf this document & I found recommended part as TPD8E003.
So now I'm in confusion to use any one of them, Can you please suggest me , which…
Thank you for your reply,
here is the Log file of issue: Golden_7%.xlsx
here is the configuration file of the logs above: 0842.Data_MEM.gg.csv
> can you check if we are missing or setting wrong any parameters that causes battery percentage holding…
Hi Prathap. Thank you. We will use your I2C.c and I2C.h until then. So now we have 2 TI Hercules boards. 1 master TI Board connected to 2 slaves (1 is other TI board slave 0x8 and one is a real IC slave DAC 0xC0) . What changes in your test if we have…
Sir,
we have set the CUV Threshold:3500mv recovery :3800mv. but when we have connected the load and started discharging the battery pack, even when one of the cell voltages is dropped to 2600mv ,FETs are not turned OFF . and the system is not going…
