Part Number: THS4551 I'm working on a 5th order Bessel filter with a cutoff of around 1 kHz. The final stage of the filter is a 2nd order single-ended to differential MFB filter (using the THS4551), with a differential RC filter on the output. This will…
Part Number: THS4551 Hi All Am using THS4551 for converting single ended to differential output , what should be the impedance details of differential output signals . Does it need to be length matched . need suggestion on this
Part Number: THS4551 1) why choose different value of C1, C2, C4?
2) if I want to change cut off frequency higher, which capacitor should I decrease, C1 or C2 or C4 or C3?
Part Number: THS4551 Hi All
I have been using the Differential Op Amp THS4551IDGKT. Swapped the feedback resistor like positive input feedback resistor connected to positive output and negative input feedback resistor connected to negative output will…
Part Number: THS4551 Hi Am using an diff amplifier THS4551 and would like to know how much maximum gain can be set. Am using in application ; like single ended to differential conversion . Please help on this .
Part Number: THS4551 Other Parts Discussed in Thread: INA213 , INA851 , THS4561 Hi, In my design I am using THS4551 part, may I know what the maximum differential input voltage range ? And what resistor value use(Rs shunt resistor between differential input…
Part Number: THS4551 Other Parts Discussed in Thread: OPA810 , ADS127L11 Top area is digital circuit, FPGA, DDR ram, 4G module, eMMC and so on.
bottom area is analog circuit, amplifer opa810 + ths4551 + ads127L11
question: how to handle the gnd? should…
Hello Liping,
I did not see the thread had been resolved from the power side and sent back to me. I apologize for the delay in response:
I calculated 150mA as the maximum possible current draw of the combined devices in your system; this was to help you…
Part Number: THS4551 Other Parts Discussed in Thread: THP210 , THS4561 , THS4500 , THS4511 , THS4501
Hi team.
I am looking for an alternative part which has same specfications as THS4551, but should support for higher supply voltage range Minimum +/- 5v…