Part Number: TPS65150-Q1 Other Parts Discussed in Thread: TPS65150
Hi expert,
1) How to handle the unused pin on TPS65150 VCOM and VIN?
2) We disabled the FDLY and added the power down seq as above, because of there is power down seq circuit, there…
Hyunwoo,
The model has this text
* Error Conditions: * If the input goes beyond the recommended input voltage range, the output will float to mid supply * If the supplies goes beyond the recommended supply voltage ranges, the output will float to…
Part Number: DS90UR241-Q1 Tool/software: Hi Ti
Our soc can output 24 bpp RGB RGB888 and 32 bpp RGB ARGB8888 16 bpp RGB RGB565,
Can we use soc output 24 bpp RGB RGB888 to DS90UR241-Q1 ?
we check DS90UR241-Q1 datasheet , it only support 18-bit color…
Part Number: DP83TC813S-Q1 Tool/software: Hello, I am uising the DP83TC813SRHFRQ1 in out design and we found the linux driver at
https://github.com/TexasInstruments/ti-ethernet-software/blob/v2024.04/linux_drivers/dp83tc812.c but while compiling it…
Hello,
The UB926 can support both 18-bit mode and 24-bit mode as well as the UB927. If the OLDI output is set to 18-bit mode, the third data lane will not be active but as long as the VS, HS, DE, and PCLK are transmitted to the UB927 the signal…
Part Number: DS90UB941AS-Q1 Other Parts Discussed in Thread: ALP , , USB2ANY Tool/software: Dear TI experts,
My customer try to measure margin of DS90UB941AS-Q1 in their own PCB using ALP program.
First they used USB2ANY to coonect their PCB to PC…
Hi Gokul
It seems that reboot fail is related tps6594 driver.
When I disable tps6594 initialization by removing CONFIG_MFD_TPS6594 in kernel config, reboot works correctly.
As far as I checked, tps6594-i2c.c intialized both tps6594 and lp8764. …
Part Number: AM2612-Q1 Other Parts Discussed in Thread: AM2612
have the AM261 launchpad eval board.
planning on using the AM2612 for future automotive projects,
WE have been using (and still do use) the TMS570 Hercules.
Per data sheet AM2612:…
Part Number: TPS3307 Hi
I got a question from my customer about TPS3307-18.
This device is not written ESD ratings in datasheet.
Does this device define ESD rating?
Or could I refer to ESD protection value of TPS3307-18M?
Best regards…
