Frequent Questions

  • [FAQ] Thunderbolt Reference Designs with TI USB-C PD Products

    Other Parts Discussed in Thread: TPS65988DJ , TPS65982BB , TPD6S300A , TPS65988DK , TPS65982DMC , TPS55288 , TPS2546 , TPD4S311A , TPS65987DDK , TPS25810 , TPS2553 For customers looking to design thunderbolt systems with USB-C, how should one determine…

  • [FAQ] BQ25720: How does BQ25720 charge a battery?

    Part Number: BQ25720 In other word, what is the battery charge profile?

  • [FAQ] BQ25720EVM: How to get the Altium design files?

    Part Number: BQ25720EVM Other Parts Discussed in Thread: BQ25720 , PMP22419 , BQ25731EVM , BQ25723EVM , BQ25730EVM To speed up the design, I would like to get the Altium design files.

  • [FAQ] TDA4VM: Types of ECC Aggregators, RAM IDs and Error Injection

    Part Number: TDA4VM Please provide a detailed description of the types of ECC Aggregators, RAM IDs and Error Injection defined in SDL and what they signify.

  • [FAQ] AM625 / AM623 / AM620-Q1 / AM62L / AM62Ax / AM62D-Q1 / AM62Px / AM64x / AM243x (ALV) Design Recommendations / Commonly Observed Errors during Custom board hardware design – DDRSS : DDR4 / LPDDR4 MEMORY Interface

    Other Parts Discussed in Thread: AM62L , AM62D-Q1 , SK-AM62 , SK-AM62B-P1 , AM625 , SYSCONFIG , AM62P , TPS51200 , SK-AM64B , PROCESSOR-SDK-AM62X , SITARA-DDR-CONFIG-TOOL , AM625-Q1 , AM623 , AM620-Q1 , AM6442 , TDA4VM , AM62A7 , AM62A7-Q1 , SK-AM62P…

  • [FAQ] LP-EM-CC2340R5: Guide: Adding eventMask, and eventCallback support to uart2echo example

    Part Number: LP-EM-CC2340R5 Other Parts Discussed in Thread: CC2340R5 The following details how to modify the uart2echo SDK example to enable the event Mask, and event Callback overrun on the LP-EM-CC2340R5. Summary: By implementing the following…

  • [FAQ] DP83TC813S-Q1: How to output LED1 signal on pin 14

    Part Number: DP83TC813S-Q1 By default, pin 14 of the DP83TC813 will output the CLKOUT signal. To instead have the LED1 signal on pin 14, write to the below registers. 0x045F = 0x000F 0x0452 = 0x0000 0x0451 = 0x0009

  • [FAQ] DP83TC812S-Q1: How to to adjust slew rate of MAC IOs

    Part Number: DP83TC812S-Q1 Reducing the slew rate of MAC interface IOs can provide improvement in EMC emissions for some frequencies. This can be done using register 0x456. 0x456 bits [5] and [0] control the impedance of the RX and TX MAC interface…

  • [FAQ] TMS320C6678: How to configure interrupts and test on Keystone I devices - C6678 ?

    Part Number: TMS320C6678 Hi How to configure interrupts and test on Keystone I devices - C6678 ? Would you provide a sample code to test on C6678 board? Would you please run the test and show the output using CCS-Console? Regards Shankari…

  • [FAQ] How to use K3 resource partitioning tool with Processor SDK v9.0 or v9.1?

    Other Parts Discussed in Thread: SYSCONFIG Hi Team, I am using Processor SDK Linux v9.0 or v9.1 for development. I want to do resource allocation between the cores, but these files from SDK 8.x are no longer in the SDK: board-support/k3-image-gen tool…

View FAQ threads
Recommended For You