Frequent Questions

  • [FAQ] AM6442: Minimum value of UART Input Slew Rate

    Part Number: AM6442 Hi, My customer has some questions about UART Input Conditions. Could you please answer their questions below. 1. Is there any chance to relax the minimum value of UART Input slew rate requirement ? 2. What kind of problem…

  • [FAQ] AM62P, AM62P-Q1 Custom board hardware design - FAQs related to Processor collaterals, functioning, peripherals, interface and Starter kit

    Part Number: AM62P Other Parts Discussed in Thread: AM62D-Q1 , , , TMUX1308-Q1 , TPS65224-Q1 Hi Board designers, Refer FAQs listed below related to custom board design for AM62Px processor family that could be used along with other available design…

  • [FAQ] Comparison between DCM output voltage ripple and CCM output voltage ripple in D-CAP buck converter

    There are lots of questions asking why DCM output voltage ripple is higher than CCM ripple. This FAQ would give explanation based on D-CAP, DCAP2 and DCAP3 buck converters. The prerequisite is that on-time of DCM operation and CCM operation is same…

  • [FAQ] MCU-PLUS-SDK-AM263X: How to integrate Custom HSM Firmware on Sitara MCU devices like AM263x ?

    Part Number: MCU-PLUS-SDK-AM263X What are the important steps that needs to be considered to create a ROM compatible image ? How to run and debug an HSM Run Time image using CCS and XDS debugger ? What are the changes required for SBL for Custom HSM…

  • [FAQ] TPS25751: TPS25751 Application Customization Tool

    Part Number: TPS25751 Customers are interested in configuring the TPS25751 to meet their application need, where can they access the Application Customization Tool mentioned in the TPS25751EVM User Guide (see below)?

  • [FAQ] New DLP Pico Boot and Hardware Diagnostic Tools

    This thread will overview two new diagnostic tools to aide in system debugging, made by the DLP Pico Applications team. 1. Compatible Parts Both tools are compatible with any DLPC342x, DLPC343x, DLPC347x controller. 2. Where to find these tools…

  • [FAQ] AM62P / AM62P-Q1 Custom board hardware design - Reusing TI SK (EVM) design files

    Part Number: AM62P Hi TI Experts, I am starting a new board design and planning to use TI SK (EVM) design files for designing my custom board. Please let me know if you have any suggestions.

  • [FAQ] AM62P / AM62P-Q1 Custom board hardware design – I2C interface

    Part Number: AM62P Other Parts Discussed in Thread: AM62A7 , , AM6442 , SK-AM64B , TMP1075 Hi TI Experts, I have the below queries regarding the I2C interface: Need information on the number of I2C interfaces available. Termination of I2C interfaces…

  • [FAQ] How to assert breakpoints before the main() function in CCS

    I want to add breakpoints before the main() function as currently the program automatically runs to main and breakpoints in the startup code before main don’t work. How can I configure my projects to not run to main and stop at any breakpoint added before…

  • [FAQ] AM62P / AM62P-Q1 Custom board hardware design – Collaterals to Get started

    Part Number: AM62P Other Parts Discussed in Thread: , AM62D-Q1 , , SYSCONFIG , AM2432 Hi TI Experts, Can you provide a List of collaterals that can be referred when starting a custom board hardware design. DDR part selection guidance for Sitara…

View FAQ threads
Recommended For You