Frequent Questions

  • [FAQ] AM6412: AM64x SoC power supply slew control for 3.3V_SYS using load switch

    Part Number: AM6412 Other Parts Discussed in Thread: TPS65219 Hi team, I'm helping my customer design the power part of AM64. For the power supply slew rate control part, it says the slew rate should be controlled under 18mV/us. How should we set…

  • [FAQ] Audio FAQ Homepage

    Consumer Audio Amplifiers & Haptics Audio Converters Automotive Audio Amplifiers PUREPATHCONSOLE PPC3 Software Lookup Table How to Install PurePath Console 3 Device Apps Manually Audio Software Access Request PurePath…

  • [FAQ] Does TI have crosses for Cirrus Logic recent EOL or discontinued devices like CS536x ADC, CS43x5 DAC, WM8985/CS4243x Codec, CS842x SRC, and CS35L0x amplifiers ?

    Texas Instruments wide portfolio of Audio features Audio Converters , Audio Amplifiers and other Audio interface devices that are potential crosses for Discontinued, NRND or EOL Cirrus Logic Devices listed by Cirrus Logic here . TI potential crosses…

  • [FAQ] Redundant boot from eMMC boot partitions on AM62x

    1. booting from eMMC boot partition vs UDA partition It is recommended to use eMMC boot partition for user's BootLoader (BL) - eMMC boot partition is designed for bootloader user case - it is possible to write-protect boot0/boot1 as necessary - eMMC boot…

  • [FAQ] AM62A3: Any way to get 2 eMMC interfaces?

    Part Number: AM62A3 Hello, Using the AM62A, is there any way to implement two eMMC interfaces? The device has 3 MMC interfaces but the datasheet only shows MMC0 supporting eMMC. We really need a way to get 2 so I'll ask a couple questions from someone…

  • [FAQ] BQ78Z100 FAQs

    Other Parts Discussed in Thread: BQ78Z100 BQ78Z100 FAQ Home Page This is the home page for common questions in relation to the BQ78Z100 . FAQs Related FAQ home pages: Impedance Track FAQ home Page What information does TI need to help with…

  • [FAQ] BQ28Z610 FAQs

    BQ28Z610 FAQ Home Page This is the home page for common questions in relation to the BQ28Z610 and BQ28Z610-R1 . FAQs Related FAQ home pages: Impedance Track FAQ home Page What information does TI need to help with learning/accuracy/operation…

  • [FAQ] RM57L843: Describing step by step procedure to use Ethernet Bootloader in static IP for Hercules device (RM57x)

    Part Number: RM57L843 Describing process to download the application binary to the RM57x Hercules controller using Ethernet Bootloader in Static IP mode.

  • [FAQ] TMS570LC4357: How to download HET IDE

    Part Number: TMS570LC4357 While downloading HET IDE from below link HET_IDE IDE, configuration, compiler or debugger | TI.com Getting "Service Unavailable" error

  • [FAQ] RM48L952: How to perform 8 Byte transfer in SCI Multi-buffered Mode using DMA

    Part Number: RM48L952 When i was writing multi-buffered SCI using DMA in SCI2 Driver. However, my code was able to transmit up to 4 bytes, but when I tried to transmit 8 bytes, the RM48L952 stopped working. Even if I check the datasheet, it seems that…

View FAQ threads
Recommended For You