Frequent Questions

  • [FAQ] Tackling BLDC Datasheets: Strategy and Resources

    Welcome to a new FAQ series, Tackling BLDC Datasheets. A datasheet is the most comprehensive and accessible literature publicly available. Texas Instruments provides comprehensive datasheets presenting enormous amounts of information and data about an…

  • [FAQ] Program MCx BLDC motor driver through I2C using MSP430 LaunchPad

    Other Parts Discussed in Thread: MSP-EXP430FR2355 , MCF8316A , MCF8316AEVM , MCF8315A , MCT8329A , MCT8315A , MCT8316A The MCx8xx family of integrated motor drivers contains registers and on-board EEPROM that can be interfaced and programmed using an…

  • [FAQ] TPS544C26: Common Questions

    Part Number: TPS544C26 Q1: How to calculate and set the value of VIDO_MAX(BDh[0] + BEh[7:0]) Q2: What is the difference between I2C and SVID? Which one should I use? Q3: How do I unlock the device? Q4: How do I add device unlock to the configuration…

  • [FAQ] TDA4VL: RGMII not working on MAIN_CPSW2G in SDK 8.5 and SDK 8.6

    Part Number: TDA4VL I want to use RGMII on MAIN_CPSW2G of TDA4VL. The link is up, but I am not able to establish a communication. I can see that Rx is working but Tx is not working.

  • [FAQ] RPMsg: How to add multiple endpoints to a remote core running RTOS?

    I am using RPMsg to communicate from Linux with a remote core running RTOS (e.g., R5F or M4F). I want to define multiple RPMsg endpoints in my remote core software. How do I do that? . This FAQ applies to AM62x, AM62A, AM64x, AM65x, and probably other…

  • [FAQ] TMS320C6678: DDR3 Read write test code (or) How to do DDR3 test on C6678 EVM or K2H EVM board ?

    Part Number: TMS320C6678 Other Parts Discussed in Thread: SYSBIOS Hi Please provide "DDR3 Read write test code" (or) How to do DDR3 test on C6678 EVM or K2H EVM board ?

  • [FAQ] AM62: What is the Time Sync Router for? How do I use it?

    Part Number: AM625 AM62 has interrupt routers, just like any other processor. But it also has an interrupt router called the Time Sync Router (TSR) that is designed to route an input interrupt to multiple output interrupts. What is the TSR for? The…

  • [FAQ] TMS320C6678: How to create a EDMA PING-PONG test-code using the CSL ( Chip support Library ) package and test on C6678 EVM ?

    Part Number: TMS320C6678 Hi, How to create a EDMA PING-PONG test-code using the CSL ( Chip support Library ) package and test on C6678 EVM ?

  • [FAQ] Can the PRU implement my interface protocol?

    Part Number: AM625 I am using a TI processor with a PRU subsystem. I want to add an additional interface to my processor (e.g., UARTs, SPIs, I2S, etc), or a custom protocol (e.g., parallel SPIs, proprietary bus protocol, etc). Can I use the PRU cores…

  • [FAQ] MCU-PLUS-SDK-AM243X: How to use Tune PHY with MCU_PLUS_SDK for OSPI Controller ?

    Part Number: MCU-PLUS-SDK-AM243X Q1. How to tune PHY with MCU_PLUS_SDK ? Q2. Why is PHY tuning required ?

View FAQ threads
Recommended For You